Modulating Charge Carrier Efficient Separation Enabled by Lewis Base Modification in Paper-based Photoelectrochemical Sensor

The separation efficiency of charge carriers determines the analytical sensitivity of the paper-based photoelectrochemical sensor. Herein, the Lewis base modification strategy is proposed to promote the carrier separation through an in-situ ion exchange method. Firstly, three-dimensional paper-based hierarchically TiO₂ (PHT) arrays are prepared with the one-step hydrothermal method. With the aid of Lewis base, the photo-induced charge separation efficiency and the photocurrent signal are obviously increased. Ultimately, sensitive sensing of prostate specific antigen (PSA) is achieved and the linear range is 1 pg/mL–100 ng/mL with the detection limitation of 0.3 pg/mL.     

Flower-like titanium dioxide as novel co-reaction accelerator for ultrasensitive “off–on” electrochemiluminescence aptasensor construction based on 2D g-C3N4 layer for thrombin detection

Journal of Solid State Electrochemistry - An ultrasensitive “signal-off–on” electrochemiluminescence (ECL) biosensor is constructed based on f1-TiO2/g-C3N4/PDA for thrombin...     

Photoelectrochemical Cytosensors

Photoelectrochemical (PEC) cytosensors, a combination of the PEC process and the living-cell assay, have emerged as a powerful tool in the analytical and biological science. This mini review provides a brief introduction of this arena and summaries the key steps about the development of PEC cytosensors with representative examples, followed by future prospects based on our own opinions.     

Enhanced thermal conductivity and mechanical properties of polymeric composites through formation of covalent bonds between boron nitride and rubber chains

Hexagonal boron nitride (BN) platelets, also known as white graphite, are often used to improve the thermal conductivities of polymeric matrices. Due to the poor interfacial compatibility between BN platelets and polymeric matrices, in this study, polyrhodanine (PRd) was used to modify BN platelets and prepared functionalized BN-PRd platelets, thereby enhancing the interfacial interaction between the thermal conductive filler and polymeric matrix. Then, BN-PRd platelets were dispersed into the nitrile butadiene rubber (NBR) matrix to yield high thermally conductive composites. The presence of N? C═S groups in PRd allowed the combination of PRd and NBR chains containing stable covalent bonds via vulcanization reaction. The thermal conductivity of the as-prepared 30 vol% BN-PRd/NBR composite reached 0.40 W/mK, representing an increment of 135% over pure NBR (0.17 W/mK). In addition, the largest tensile strength of NBR composite containing 30 vol% BN-PRd platelets was 880% times of pure NBR. The 30 vol% BN-PRd/NBR composite also displayed a relatively high dielectric constant (9.35 at 100 Hz) and a low dielectric loss tangent value (0.07 at 100 Hz), indicating their usefulness as dielectric flexible materials of microelectronics. In sum, the simplicity and good efficiency of formation of covalent bonds between boron nitride and rubber chains look very promising for large-scale industrial production of high thermally conductive composites.     

High-fidelity Recognition of Organotrifluoroborate Anions (R−BF3−) as Designer Guest Molecules

The recognition of boron compounds is well developed as boronic acids but untapped as organotrifluoroborate anions (R−BF₃⁻). We are exploring the development of these and other designer anions as anion-recognition motifs by considering them as substituted versions of the parent inorganic ion. To this end, we demonstrate strong and reliable binding of organic trifluoroborates, R−BF₃⁻, by cyanostar macrocycles that are size-complementary to the inorganic BF₄⁻ progenitors. We find that recognition is modulated by the substituent's sterics and that the affinities are retained using the common K⁺ salts of R−BF₃⁻ anions.     

Developing Flexible Quinacridone-Derivatives-Based Photothermal Evaporaters for Solar Steam and Thermoelectric Power Generation

Solar-driven interfacial vaporization by localizing solar-thermal energy conversion to the air−water interface has attracted tremendous attention. In the process of converting solar energy into heat energy, photothermal materials play an essential role. Herein, a flexible solar-thermal material di-cyan substituted 5,12-dibutylquinacridone (DCN−4CQA)@Paper was developed by coating photothermal quinacridone derivatives on the cellulose paper. The DCN−4CQA@Paper combines desired chemical and physical properties, broadband light-absorbing, and shape-conforming abilities that render efficient photothermic vaporization. Notably, synergetic coupling of solar-steam and solar-electricity technologies by integrating DCN−4CQA@Paper and the thermoelectric devices is realized without trade-offs, highlighting the practical consideration toward more impactful solar heat exploitation. Such solar distillation and low-grade heat-to-electricity generation functions can provide potential opportunities for fresh water and electricity supply in off-grid or remote areas.     

Acridone-Based Host Materials for Green Phosphorescent and Thermally Activated Delayed Fluorescent OLEDs with Low-Efficiency Roll-Offs

By linking the carbazole unit to the nitrogen atom of acridone through phenyl or pyridyl, two compounds, named 10-(4-(9H-carbazol-9-yl)phenyl)acridin-9(10H)-one (AC-Ph-Cz) and 10-(5-(9H-carbazol-9-yl)pyridin-2-yl)acridin-9(10H)-one (AC-Py-Cz) were designed and synthesized. These two materials, characterized with highly twisted and rigid structure, good thermal stability, and balanced carrier-transporting properties, were employed as host materials for green phosphorescent and thermally activated delayed fluorescent organic light-emitting diodes (OLEDs). The carbazole group, despite its small contribution to the highest occupied molecular orbitals (HOMOs) of these two materials, plays an essential role as an intramolecular host in energy delivering and improving the hole transporting ability of these two hosts. The incorporation of the electron-deficient pyridyl group as a linking group slightly improves the electron transporting capability of AC-Py-Cz. The green phosphorescent OLED (PhOLED) based on AC-Py-Cz exhibited excellent device performance with a turn-on voltage of 2.5 V, a maximum power efficiency and an external quantum efficiency (η_ext) of 89.8 lm W⁻¹ and 25.2 %, respectively, benefitting from the better charge-balancing ability of AC-Py-Cz host due to the presence of the pyridyl bridge. More importantly, all the devices based on these two hosts showed low efficiency roll-off at high brightness due to the suppressed non-radiative transition in the emitting layer. In particular, the AC-Py-Cz-hosted green PhOLED exhibited an efficiency roll-off of 1.6 % from the maximum next at a high brightness of 1000 cd m⁻² and a roll-off of 15.9 % at an extremely high brightness of 10000 cd m⁻². This study manifests that acridone-based host materials have great potential in fabricating OLEDs with low efficiency roll-off.     

Short-Distance Teleportation of an Arbitrary Two-Qubit State Via a Bell State

We propose a scheme for teleportation of an arbitrary two-qubit state by using a Bell state as the quantum channel working together with an auxiliary qubit. Our scheme needs less entanglement resource, but at the cost of shortening teleportation distance. This is because that in order to successfully recover the teleported state, both sender and receiver need to implement quantum-gate operations on the shared auxiliary qubit. So, the auxiliary qubit must be close to both sender and receiver. Otherwise, the sender and receiver cannot carry out quantum-gate operations on it. Thus, our scheme is invalid for long-distance teleportation. But for short-distance teleportation, our scheme is an optimal choice because it requires less entanglement resource. From a practical point of view, our scheme is very promising for application in quantum teleportation on chip.